Date: 4 October 2017
Time: 10.00 a..m
Place: Level 5 Medical Electronic Section
Today, I meet with my supervisor to discuss further my project progress. He was suggested me to do the test carbon dioxide sensor by using the smoke from soldering iron as source of the carbon dioxide gas. So, I collect the data by test the sensor as my preliminary result.
The sensor must be place inside the box to ensure all the smoke will not spread everywhere and efficiently absorbed by the carbon dioxide sensor. The box act as the laboratory prototype. The data can be collect either real-time based or else.
- The carbon dioxide sensor inside the box to detect the smoke.
- The soldering iron will produce the smoke as source.
- The box act as laboratory prototype.
- The smoke will not spread everywhere.
- The data easy to collect and efficiently.
The sensor must be place inside the box to ensure all the smoke will not spread everywhere and efficiently absorbed by the carbon dioxide sensor. The box act as the laboratory prototype. The data can be collect either real-time based or else.
- The carbon dioxide sensor inside the box to detect the smoke.
- The soldering iron will produce the smoke as source.
- The box act as laboratory prototype.
- The smoke will not spread everywhere.
- The data easy to collect and efficiently.
 |
| Smoke from soldering iron |
No comments:
Post a Comment